V košíku nie sú žiadne produkty.
2712 STOLOVÁ PÍLA Makita
| Rozmery | 1,670 × 700 × 810 mm |
|---|---|
| Dru00e1u017eka | |
| farba | |
| Materiu00e1l | |
| objem | |
| akumulator | |
| al_hlinik | |
| automaticke_cistenie_filtra | |
| b_bodove_svetlo_b | |
| b_hlavne_svetlo_b | |
| basovy_reproduktor | |
| bl_motor | |
| bluetooth | |
| bluetooth_trieda | |
| bocny_naklon_dolava_do | |
| bocny_naklon_doprava_az_do | |
| brzda_motora | |
| cas_na_naplnenie_zasobnika | |
| cas_prevadzky_s_2_x_bl1860b_2_x_bl4050f_stupen_1_2_3 | |
| cas_vyhrievania_na_jedno_nabitie_baterie_bl1860b | |
| cas_zahrievania_na_jedno_nabitie_baterie_bl1041b | |
| casy_nabijania_4_ks_lxt_akumulatorov_br_bl1830b_bl1850b_bl1860b | |
| casy_nabijania_4_ks_xgt_akumulatorov_br_bl4020_bl4025_bl4040_bl405_bl4080 | |
| casy_nabijania_8_ks_lxt_akumulatorov_br_bl1830b_bl1850b_bl1860b | |
| casy_nabijania_8_ks_xgt_akumulatorov_br_bl4020_bl4025_bl4040_bl405_bl4080 | |
| celkova_dlzka | |
| celkova_nabijatelna_kapacita | |
| celkova_vyska | |
| chod_dolava_a_doprava | |
| cista_hmotnost | |
| deadman_prepinac | |
| delenie_pilovej_retaze | |
| delenie_retaze | |
| desat_stupnov_ohrevu | |
| diamantovy_kotuc | |
| dlzka_bitu | |
| dlzka_hadice | |
| dlzka_kabla | |
| dlzka_klinca | |
| dlzka_klincov | |
| dlzka_kmitu | |
| dlzka_listy | |
| dlzka_napajacieho_kabla | |
| dlzka_pasu | |
| dlzka_piloveho_listu | |
| dlzka_piniek | |
| dlzka_prepojovacieho_kabla | |
| dlzka_rezu | |
| dlzka_skrutky | |
| dlzka_sponky | |
| dlzka_striekacej_hadice | |
| dlzka_vibratora_hriadela | |
| dlzka_vodiacej_listy | |
| dlzka_zdvihu | |
| doba_dosiahnutia_bodu_varu | |
| doba_fukania_rychlost_1_2_3_4_s_bl4025 | |
| doba_pouzitia_s_bl1041b_stupen_1_2_3 | |
| doba_pouzitia_s_bl1860b_stupen_1_2_3 | |
| doba_prevadzky_na_jedno_nabitie_akumulatora_bl1016 | |
| doba_prevadzky_na_jedno_nabitie_akumulatora_bl1830b | |
| doba_prevadzky_na_jedno_nabitie_akumulatora_bl1850b | |
| doba_prevadzky_na_jedno_nabitie_s_bl1830b_1_2_stupen | |
| doba_prevadzky_na_jedno_nabitie_s_bl1860_bez_automatickeho_otacania_1_2_3_stupen | |
| doba_prevadzky_na_jedno_nabitie_s_bl1860_s_automatickym_otacanim_1_2_3_stupen | |
| doba_prevadzky_na_jedno_nabitie_s_bl1860b_bez_automatickeho_otacania_1_2_3_stupen | |
| doba_prevadzky_na_jedno_nabitie_s_bl1860b_s_automatickym_otacanim_1_2_3_stupen | |
| doba_prevadzky_na_jedno_nabitie_s_bl4040_bez_automatickeho_otacania_1_2_3_stupen | |
| doba_prevadzky_na_jedno_nabitie_s_bl4040_s_automatickym_otacanim_1_2_3_stupen | |
| doba_prevadzky_s_2_x_bl4020_350_w_500_w | |
| doba_prevadzky_s_2_x_bl4025_350_w_500_w | |
| doba_prevadzky_s_2_x_bl4040_350_w_500_w | |
| doba_prevadzky_s_2_x_bl4050_350_w_500_w | |
| doba_prevadzky_s_2_x_bl4080_350_w_500_w | |
| doba_prevadzky_s_bl4050f | |
| doba_prevadzky_s_pdc1200_350_w_500_w | |
| doba_svietenia | |
| doba_svietenia_bodove_sveto | |
| doba_svietenia_s_bl1850b_stupen_1_2_3 | |
| doba_svietenia_stupen_1_2 | |
| doba_svietenia_stupen_1_2_3 | |
| doba_svietenia_stupen_1_2_3_strboskop | |
| doba_svietenia_vysoka_stredna_nizka | |
| doba_varenia_1_salka_kavy_160_ml | |
| dosah | |
| dostupne_velkosti | |
| drazka | |
| drazkovanie | |
| drevotrieskova_doska_na_rezanie_vibracii_k | |
| drziak_naradia | |
| dva_stupne_ohrevu | |
| efektivna_dlzka_rezu | |
| efektivna_dlzka_strihu | |
| emisie_vibracii_a_h | |
| emisie_vibracii_ah_d | |
| energeticka_kapacita | |
| energeticka_kapacita_pdc1200 | |
| energia_narazu_epta | |
| excentricita | |
| excentricke_pohyby | |
| excentricke_pohyby_za_minutu | |
| excentricke_vykyvy | |
| excentricke_vykyvy_dolestovaci_mod | |
| excentricke_vykyvy_lestiaci_mod | |
| faktor_akustickej_neistoty_k | |
| faktor_hluku_k | |
| faktor_neistoty_vibracii_k | |
| faktor_neistoty_vibracii_s_priklepom_do_betonu_k | |
| faktor_sumu_k | |
| faktor_vibracii_k | |
| farba_luca | |
| farba_svietenia | |
| frekvencia_dab | |
| frekvencne_pasma | |
| fukacia_sila | |
| hak_a_slucka_pre_velkost_papiera | |
| hladina_akustickeho_tlaku_l_sub_pa_sub | |
| hladina_akustickeho_vykonu_l_sub_wa_sub | |
| hladina_hluku | |
| hladina_vody_min | |
| hladina_zvuku | |
| hlbka | |
| hlbka_hoblovania | |
| hlbka_hoblovania_0_150_mm | |
| hlbka_hoblovania_150_240_mm | |
| hlbka_hoblovania_240_312_mm | |
| hlbka_ponoru | |
| hlbka_ponoru_max | |
| hlbka_zarezania | |
| hlinikovy | |
| hlinikovy_podvozok | |
| hlucnost | |
| hluk_odchylka_k | |
| hmotnost_bez_kabla_epta | |
| hmotnost_bez_zacieho_nastroja | |
| hmotnost_epta | |
| hmotnost_stroja_vratane_baterie_epta | |
| hmotnst_s_popruhmi_bez_akumulatorov | |
| hodnota_vibracii_a_sub_h_sub | |
| hrubka_cepele | |
| hrubka_izolacnej_steny | |
| hrubka_klincov | |
| hrubka_kotuca | |
| hrubka_kotuca_a60 | |
| hrubka_kotuca_gc120 | |
| hrubka_kotuca_wa60 | |
| hrubka_pasu | |
| hrubka_rezu | |
| hrubka_sponky | |
| hrubka_tiesky_240_304_mm | |
| hrubka_triesky | |
| hrubka_triesky_150_240_mm | |
| hrubka_triesky_do_150_mm | |
| id_600_v_cv_500_mm2_jednojadrovy | |
| id_600_v_iv_500_mm2_jednojadrovy | |
| id_600v_vvr_150mm2_trojjadrovy | |
| id_6600v_cv_500_mm2_jednojadrovy | |
| idealna_pre_travnatu_plochu | |
| indikator_vystupu | |
| intenzita_svetla | |
| intenzita_svetla_0_5_1_m | |
| intenzita_svetla_bodove_svetlo | |
| intenzita_svetla_hlavny_zdroj_svetla | |
| intenzita_svetla_stupen_1_2 | |
| intenzita_svetla_stupen_1_2_3 | |
| intenzita_svetla_vysoka_stredna_nizka | |
| k_faktor_hluku | |
| kapacita_baterie | |
| kapacita_mokre_vysavanie | |
| kapacita_nadrze_na_retazovy_olej | |
| kapacita_olejovej_nadrze | |
| kapacita_papierove_vrecko | |
| kapacita_papieroveho_vrecka | |
| kapacita_rezania_pri_400_n_mm2 | |
| kapacita_rezania_pri_800_n_mm2 | |
| kapacita_suche_vysavanie | |
| kapacita_textilne_vrecko | |
| kapacita_varenia_na_jednu_12_v_max_4_0_ah | |
| kapacita_varenia_na_jednu_14_4v_bateriu_3_0_ah | |
| kapacita_varenia_na_jednu_18v_bateriu_3_0_ah | |
| kapacita_varenia_na_jednu_18v_bateriu_6_0_ah | |
| kapacita_vrecko_na_prach | |
| kapacita_zasobnika | |
| kapacita_zberneho_sacka | |
| kapacita_zbernej_nadoby | |
| kapacita_zbernej_nadoby_prach_voda | |
| kapacita_zbernej_nadoby_suche_mokre | |
| kapacita_zbernej_sackov_techtil_papier | |
| kapacita_zberu_pre_vodu | |
| kliestiny_rozsah | |
| klince_s_polkruhovou_hlavou | |
| kompatibilna_dlzka_skrutky | |
| laserova_dioda | |
| laserova_emisna_trieda | |
| led_ziarovka | |
| magneticka_pridrzna_sila | |
| material | |
| max_cistiaca_plocha | |
| max_doba_fukania_s_2_x_bl1840b | |
| max_doba_fukania_s_2_x_bl1850b | |
| max_doba_fukania_s_2_x_bl1860b_stupen_1_2 | |
| max_doba_fukania_s_bl1850b_stupen_1_2_3 | |
| max_doba_fukania_s_bl1860b | |
| max_doba_fukania_s_pdc1200_normal_boost | |
| max_doba_fukania_sania_s_bl4025 | |
| max_doba_prevadzky_s_bl4025_stupen_1_2_3 | |
| max_dojazd_4_x_bl1860 | |
| max_dosah_postreku_horizontal | |
| max_dosah_pripojenia | |
| max_energeticka_kapacita | |
| max_hlasitost_bluetooth | |
| max_hlbka_drazky | |
| max_hlbka_frezovania | |
| max_hlbka_materialu | |
| max_hlbka_rezu | |
| max_hlbka_rezu_pri_45 | |
| max_hlbka_rezu_pri_60 | |
| max_hlbka_rezu_pri_90 | |
| max_hlbka_rezu_pri_pri_48 | |
| max_hrubka_brusneho_kotuca | |
| max_hrubka_kablov | |
| max_hrubka_kotuca | |
| max_hrubka_oceloveho_plechu | |
| max_hrubka_rezneho_kotuca | |
| max_hrubka_rezu | |
| max_hrubka_rezu_ocel | |
| max_hrubka_silonu | |
| max_hrubka_strihu | |
| max_hrubka_strihu_ocel_nerez | |
| max_kapacita | |
| max_kapacita_krimpovania_cu_med | |
| max_obsah_zberneho_vrecka_textilne_lanove | |
| max_odchylka_horizontalne | |
| max_odchylka_vertikalne | |
| max_otacky | |
| max_otvorenie_cepele | |
| max_otvoreninie_noznice | |
| max_pracovny_cas | |
| max_pracovny_tlak | |
| max_prevadzkovy_tlak | |
| max_priemer_brusky | |
| max_priemer_brusneho_kotuca | |
| max_priemer_brusnych_kamenov | |
| max_priemer_drevo_0 | |
| max_priemer_konarov | |
| max_priemer_miesadla | |
| max_priemer_ocelovej_rurky | |
| max_priemer_rezneho_kotuca | |
| max_priemer_rurka_0 | |
| max_priemer_viazania | |
| max_priemer_vrtania | |
| max_priemer_vrtania_drevo_1_2_stupen_samorezny_vrtak | |
| max_priemer_vrtania_drevo_1_2_stupen_vrtacia_korunka | |
| max_priemer_vrtania_drevo_1_2_stupen_vrtak | |
| max_priemer_vrtania_ocel | |
| max_prietok | |
| max_prietok_tekutin | |
| max_prietok_vody | |
| max_prietok_vody_bez_trysky | |
| max_prietok_vzduchu | |
| max_prietok_vzduchu_1_2_3_stupen | |
| max_prietok_vzduchu_1_2_3_stupen_s_bl1860b | |
| max_prietok_vzduchu_fukania | |
| max_prietok_vzduchu_normal_boost | |
| max_prietok_vzduchu_rezim_boost | |
| max_prietok_vzduchu_sania | |
| max_prietok_vzduchu_sanie_fukanie | |
| max_prietok_vzduchu_stupen_1_2_3_4 | |
| max_prietok_vzduchu_tempomatu_1_2_3 | |
| max_prud_vzduchu | |
| max_rezna_kapacita | |
| max_rezna_kapacita_pri_45 | |
| max_rezna_kapacita_pri_90 | |
| max_rezna_kapacita_s_krytom_bez_krytu | |
| max_rezny_vykon | |
| max_rezny_vykon_drevo | |
| max_rezny_vykon_makka_ocel_hlinik | |
| max_rezny_vykon_ocel | |
| max_rezny_vykon_ocel_jakel_s_x_v_x_hrubka | |
| max_rezny_vykon_ocel_rura_hrubka | |
| max_rezny_vykon_pri_0 | |
| max_rezny_vykon_pri_48 | |
| max_rezny_vykon_pri_50 | |
| max_rezny_vykon_pri_53 | |
| max_rezny_vykon_pri_56 | |
| max_rezny_vykon_pri_60 | |
| max_rezny_vykon_pri_600_n_mm2 | |
| max_rezny_vykon_priemer_rury | |
| max_rezny_vykon_rura | |
| max_rezny_vykon_rurka_profil | |
| max_rezny_vykon_sadrokarton | |
| max_rychlost_retaze | |
| max_rychlost_retaze_eco_medium_high | |
| max_rychlost_vzduchu | |
| max_rychlost_vzduchu_1_2_3_stupen | |
| max_rychlost_vzduchu_1_2_3_stupen_s_bl1860b | |
| max_rychlost_vzduchu_1_2_stupen_s_bl1860b | |
| max_rychlost_vzduchu_bost_mode | |
| max_rychlost_vzduchu_fukanie | |
| max_rychlost_vzduchu_kratka_dlha_hubica | |
| max_rychlost_vzduchu_normal_boost | |
| max_rychlost_vzduchu_rezim_boost | |
| max_rychlost_vzduchu_tempomatu_1_2_3 | |
| max_sila_fukania | |
| max_sila_fukania_normal_boost | |
| max_sila_fukania_rezim_boost | |
| max_sila_fukania_tempomatu_1_2_3 | |
| max_sila_krimpovania | |
| max_sila_sania | |
| max_sila_tahu | |
| max_sila_tlaku | |
| max_staticky_tlak | |
| max_teplota | |
| max_teplota_privadzanej_vody | |
| max_uhol_stupania | |
| max_vakuum | |
| max_velkost_kliestiny | |
| max_vrtaci_vykon_beton | |
| max_vrtaci_vykon_beton_korunka_preraz_vrtak | |
| max_vrtaci_vykon_beton_kov_drevo | |
| max_vrtaci_vykon_diamantova_korunka | |
| max_vrtaci_vykon_drevo | |
| max_vrtaci_vykon_drevo_vrtak_vykruzovacia_korunka | |
| max_vrtaci_vykon_korunka | |
| max_vrtaci_vykon_ocel | |
| max_vrtaci_vykon_ocel_beton_drevo | |
| max_vrtaci_vykon_ocel_drevo | |
| max_vrtaci_vykon_ocel_drevo_beton | |
| max_vrtaci_vykon_ocel_drevo_murivo | |
| max_vrtaci_vykon_ocel_drevo_vr_korunka | |
| max_vrtaci_vykon_ocel_drevo_vr_korunka_kamen | |
| max_vrtaci_vykon_ocel_drevo_vr_korunka_murivo | |
| max_vrtaci_vykon_ocel_hlinik | |
| max_vrtaci_vykon_ocel_kamen | |
| max_vrtaci_vykon_ocel_kamen_drevo_priemer | |
| max_vrtaci_vykon_ocel_kamen_drevo_vyk_korunka | |
| max_vrtaci_vykon_vrtak | |
| max_vykon_12_v_max | |
| max_vykon_14_4_v | |
| max_vykon_14_4_v_18_v_40_vmax_ac | |
| max_vykon_18_v | |
| max_vykon_18v_6ah | |
| max_vykon_7_2_v | |
| max_vykon_ac | |
| max_vykon_fukanie_sanie | |
| max_vykon_s_bl1860b | |
| max_vykon_stupen_1_2_3_4 | |
| max_vyska_rezu | |
| max_vyska_snehu | |
| max_vystup | |
| max_vystup_14_4v | |
| max_vystup_18v | |
| max_vystup_napatia_pdc1200_pdc01 | |
| max_vzdialenost_vyhadzovania_snehu | |
| max_zahlbenie | |
| max_zanorenie | |
| maximalna_hlbka_skenovania | |
| maximalna_hrubka_oceloveho_plechu_400_n_mm_sup_2_sup | |
| maximalna_hrubka_plechu_inox_600_n_mm_sup_2_sup | |
| maximalna_hrubka_vetvy | |
| maximalna_odchylka | |
| maximalna_sacia_vyska | |
| maximalna_sirka_rezu_45 | |
| maximalna_sirka_rezu_90 | |
| maximalna_vyska_pohara | |
| maximalny_dosah | |
| maximalny_krutiaci_moment | |
| maximalny_krutiaci_moment_tvrdy_makky_spoj | |
| maximalny_podtlak | |
| maximalny_povolovaci_moment | |
| maximalny_priemer_otvoru | |
| maximalny_prietok | |
| maximalny_prietok_pripojenie_na_vodovod_stupen_1_2 | |
| maximalny_prietok_samonasavanie_stupen_1_2 | |
| maximalny_prikon | |
| maximalny_pripojitelny_vykon | |
| maximalny_saci_vykon | |
| maximalny_saci_vykon_stupen_1_2 | |
| maximalny_saci_vykon_stupen_1_2_3 | |
| maximalny_tlak | |
| maximalny_tlak_vzduchu_vodny_stlpec | |
| maximalny_utahovaci_moment | |
| maximalny_utahovaci_moment_1_stupen | |
| maximalny_utahovaci_moment_2_stupen | |
| maximalny_utahovaci_moment_tvrdy_makky_spoj | |
| maximalny_vykon | |
| maximalny_vykon_1_2_3_stupen | |
| maximalny_vystupny_prud | |
| maximalny_vystupny_vykon | |
| maximalny_vystupny_vykon_s_bl4040f | |
| medeny_viazany | |
| menovite_napatie | |
| menovite_napatie_baterie | |
| menovity_vykon | |
| mikrovlnny_vykon_vysoky_nizky | |
| min_hladina_sania | |
| min_polomer_rezania | |
| minimalny_priemer_hadice | |
| mnozstvo_uvarenej_vody | |
| motorova_brzda | |
| mulcovaci_noz | |
| mulcovacia_funkcia | |
| nadrz_retazovy_olej | |
| napajacie_napatie | |
| napatie | |
| nastavenia_urovne_ohrievania | |
| nastavenia_urovne_vykurovania | |
| nastavenie_jasu | |
| nastavenie_pracovnej_vysky | |
| nastavenie_predkmitu | |
| nastavenie_rezu | |
| nastavenie_sklonu_rezu_do_prava_lava | |
| nastavenie_uhla_svietenia | |
| nastavenie_vysky_kosenia | |
| neistota_k_sub_lpa_sub | |
| nepretrzita_doba_svietenia | |
| nepretrzita_doba_svietenia_s_bl1041b_stupen_1_2_3 | |
| nepretrzita_doba_svietenia_s_bl1860b_stupen_1_2_3 | |
| nepretrzita_doba_svietenia_s_bl4040_stupen_1_2_3 | |
| nepretrzita_doba_svietenia_stupen_1_2 | |
| nepretrzita_prevadzka_radio | |
| nepretrzita_prevadzka_radio_lampa_stupen_1 | |
| nepretrzita_prevadzka_s_2_x_bl4050f_stupen_1_2_3 | |
| nepretrzita_prevadzka_s_bl1860b | |
| nepretrzita_prevadzka_s_bl4025_stupen_1_2_3_4 | |
| nepretrzita_prevadzka_s_bl4040_bl1860b_bl1050b | |
| nepretrzita_prevadzka_s_bl4040_stupen_4 | |
| nepretrzita_prevadzka_s_bl4050f_stupen_1_2_3_4 | |
| nepretrzita_prevadzka_s_pdc1500 | |
| neprtrzita_prevadzka_s_bl4050f_18_5_60 | |
| nivelacny_rozsah | |
| nizky_tlak | |
| nosnost | |
| objem_nadoby | |
| objem_nadrze | |
| objem_nasavania | |
| objem_vane_pevny_mat_tekutiny | |
| objem_zasobnika | |
| objem_zberneho_kosa | |
| objem_zbernej_nadoby | |
| objem_zmesi | |
| oblast_merania_interier | |
| obsah | |
| obsah_nadrzky_na_vodu | |
| obsah_vodnej_nadrze | |
| obsah_zasobnika_na_stlaceny_vzduch | |
| obvod_krytu_motora | |
| obvod_rukovati | |
| ocelovy_podvozok | |
| ochrana_pred_restartom | |
| ochrana_proti_nahodnemu_zapnutiu | |
| ochrana_proti_pretazenia | |
| odchylka_k | |
| oddelovaci_vykon_45 | |
| oddelovaci_vykon_90 | |
| odporucana_plocha_kosenia | |
| odporucany_kompresor | |
| optimalna_vzdialenost_prenosu | |
| optimalny_dosah_pripojenia | |
| otacky | |
| otacky_bez_zatazenia | |
| otacky_naprazdno | |
| otacky_naprazdno_1_stupen | |
| otacky_naprazdno_2_stupen | |
| otacky_naprazdno_3_stupen | |
| otacky_naprazdno_4_stupen | |
| otacky_naprazdno_pri_3_rychlostnom_stupni | |
| otacky_naprazdno_stupen_1_2 | |
| otacky_pri_volnobehu | |
| otacky_pri_zatazi | |
| otacky_volnobezne | |
| otocny_dolava_az_o | |
| otocny_doprava_az_o | |
| otvor_pre_objimku | |
| pat_stupnov_chladenia | |
| piemer_klincov | |
| pocet_bodov_laseroveho_luca | |
| pocet_brusnych_pohybov | |
| pocet_kmitov_dolestovaci_mod | |
| pocet_kmitov_lestiaci_mod | |
| pocet_kmitov_za_minutu | |
| pocet_kmitov_za_minutu_stupen_1_2 | |
| pocet_laserovych_liniek | |
| pocet_lucov | |
| pocet_merani_na_sadu_baterii | |
| pocet_nabijacich_portov | |
| pocet_otacok_piest | |
| pocet_rezacich_pohybov | |
| pocet_strihov_na_prazdno | |
| pocet_strihov_za_minutu | |
| pocet_strihov_za_minutu_stupen_1_2_3 | |
| pocet_uder_za_minutu_1_stupen | |
| pocet_uder_za_minutu_2_stupen | |
| pocet_uder_za_minutu_stupen_1_2 | |
| pocet_uder_za_minutu_stupen_1_2_3 | |
| pocet_uder_za_minutu_stupen_1_2_3_4 | |
| pocet_uderov_naprazdno | |
| pocet_uderov_naprazdno_1_stupen | |
| pocet_uderov_naprazdno_2_stupen | |
| pocet_uderov_naprazdno_3_stupen | |
| pocet_uderov_naprazdno_4_stupen | |
| pocet_uderov_naprazdno_stupen_1_2_3_4 | |
| pocet_uderov_za_minutu | |
| pocet_vreciek | |
| podporovane_baterie | |
| pohon_kolies | |
| pracovna_hlbka | |
| pracovna_sirka | |
| pracovna_teplota | |
| pracovna_zataz | |
| pracovny_cas_pri_jednom_nabiti_2_baterii_bl1860b | |
| pracovny_cas_pri_jednom_nabiti_baterie_v_rezime_vysokeho_jasu | |
| pracovny_cyklus | |
| pracovny_dosah_s_detektorom | |
| pracovny_tlak | |
| pracovny_tlak_pripojenie_na_vodovod_stupen_1_2 | |
| pracovny_tlak_samonasavanie_stupen_1_2 | |
| pracovny_tlak_stupen_1_2_3 | |
| prenikanie_prachu | |
| presnost | |
| presnost_merania | |
| presnost_samonivelacie | |
| presnost_vodovahy | |
| prevadzkova_doba_18v_6_0_ah | |
| prevadzkovy_dosah_rotujuci_luc | |
| priemer_brusneho_kotuca | |
| priemer_brusneho_papiera | |
| priemer_brusnej_dosky | |
| priemer_drotu | |
| priemer_drviaceho_noza | |
| priemer_klincov | |
| priemer_lestiaceho_kotuca | |
| priemer_lestiacej_podusky | |
| priemer_lestiacich_kotucov | |
| priemer_miesadla | |
| priemer_nitov | |
| priemer_nylonovej_kefy | |
| priemer_objimky | |
| priemer_okruhu | |
| priemer_otvoru | |
| priemer_otvoru_kotuca | |
| priemer_padu | |
| priemer_piloveho_kotuca | |
| priemer_piniek | |
| priemer_prednych_kolies | |
| priemer_rezneho_kotuca | |
| priemer_rezu | |
| priemer_skrutky | |
| priemer_skrutky_sadrokartonu | |
| priemer_strihu | |
| priemer_vibratora | |
| priemer_vrtule | |
| priemer_zadnych_kolies | |
| priemer_zakladnej_dosky | |
| priestorovy_hodnota_vibracii_a_sub_h_sub | |
| priestorovy_vibracie_vrtanie_a_sub_h_sub | |
| prietok_stupen_1_2 | |
| prietok_vody | |
| prietok_vody_stupen_1_2_3 | |
| prietok_vzduchu | |
| prietok_vzduchu_stupen_1_2_3 | |
| prietok_vzduchu_stupen_1_2_3_4 | |
| prietok_vzduchu_turbo_mod | |
| prikon | |
| rezim_cinnosti_priklepove_vrtanie_do_betonu | |
| rezim_cinnosti_vrtanie_do_kovu | |
| rezim_skenovania | |
| rezna_kapacita | |
| rezny_kotuc | |
| rozmer_brusneh_pasu_s_x_d | |
| rozmer_brusneho_papiera | |
| rozmer_brusneho_pasu | |
| rozmer_brusnej_dosky | |
| rozmer_d_x_s_x_v_pracovny | |
| rozmer_d_x_s_x_v_prepravny_skladovaci | |
| rozmer_pasov | |
| rozmer_piloveho_pasu | |
| rozmer_s_popruhmi | |
| rozmer_spodnej_platne | |
| rozmer_stola | |
| rozmer_zakladnej_dosky | |
| rozmery_bez_akumulatora_d_x_s_x_v | |
| rozmery_celkova_dlzka | |
| rozmery_d_x_s | |
| rozmery_samotny_stroj_d_x_s_x_v | |
| rozmery_x_v | |
| rozostup_nozov | |
| rozpatie_luca_horizontalne | |
| rozpatie_luca_zvisle | |
| rozsah_automatickej_kalibracie | |
| rozsah_naklonu_zakl_dosky | |
| rozsah_nastavenia_riadenia_krutiaceho_momentu | |
| rozsah_pasma_am | |
| rozsah_pasma_dab | |
| rozsah_pasma_dab_dab | |
| rozsah_pasma_fm | |
| rozsah_pre_samonivelizaciu | |
| rozsah_skosenia | |
| rozsah_upinania_kliestiny | |
| rychlost | |
| rychlost_brusneho_pasu | |
| rychlost_jazdy | |
| rychlost_otacania | |
| rychlost_otacania_kefy_1_stupen | |
| rychlost_otacania_kefy_2_stupen | |
| rychlost_otacania_kefy_3_stupen | |
| rychlost_pasu | |
| rychlost_piloveho_pasu | |
| rychlost_posuvu | |
| rychlost_retaze | |
| rychlost_retaze_bez_zatazenia | |
| rychlost_strihu | |
| rychlost_viazania | |
| rychlost_vpred_1_2 | |
| rychlost_vpred_1_2_3 | |
| rychlost_vzad | |
| saci_otvor | |
| saci_vykon | |
| saci_vykon_1_stupen | |
| saci_vykon_2_stupen | |
| saci_vykon_3_stupen | |
| saci_vykon_stupen_1_2 | |
| saci_vykon_stupen_1_2_3 | |
| sada_obsahuje | |
| samorezna_skrutka | |
| sasi | |
| sedem_stupnov_chladenia | |
| sedem_stupnov_ohrevu | |
| sila_jednotliveho_priklepu | |
| sila_jednotliveho_priklepu_epta | |
| sirka | |
| sirka_celusti | |
| sirka_drazky | |
| sirka_hoblovania | |
| sirka_luca | |
| sirka_noznice_na_travu | |
| sirka_pasu | |
| sirka_rezneho_nastroja | |
| sirka_rezu | |
| sirka_sponky | |
| sirka_zaberu | |
| sirka_zaberu_hlavne_kefy_s_bocnou_kefou | |
| sirka_zaberu_noz_kov_noz_plast_zacia_hlava | |
| sirka_zaberu_noz_plast_zacia_hlava | |
| sirka_zaberu_zacia_hlava_plast_noz | |
| sklon_stola | |
| sklopny_dolava_az_o | |
| sklopny_doprava_az_o | |
| skrutka_do_sadrokartonu | |
| skrutky_s_hrubym_zavitom | |
| skrutky_s_vysokou_pevnostou | |
| skrutky_s_vysokou_pevnostou_10_9 | |
| skrutky_s_vysokou_pevnostou_f10t | |
| smer_polomeru | |
| spodny_otvor | |
| sposob_stabilizacie | |
| sposob_vysavania | |
| standardne_skrutky | |
| standardny_rezaci_nastroj | |
| standardny_zaci_nastroj | |
| strizmy_radius | |
| strizny_vykon_pri_200_n_mm | |
| strojova_skrutka | |
| strojove_skrutky | |
| stupen_ochrany | |
| svetelny_tok | |
| svetelny_tok_bodove_svetlo | |
| svetelny_tok_hlavny_zdroj_svetla | |
| svetelny_tok_stupen_1_2 | |
| svetelny_tok_stupen_1_2_3 | |
| svetelny_tok_vysoky_stredny_nizky | |
| svetelny_vykon | |
| system_ochrany_baterie | |
| technologia_kosenia | |
| teplota | |
| tireda_vysavania | |
| tolerancia_detekcie_polohy | |
| tolerancia_snimania_hlbky | |
| triax_hodnota_vibracii_a_sub_h_sub | |
| triax_hodnota_vibracii_a_sub_h_sub_predna_rukovat | |
| triax_hodnota_vibracii_a_sub_h_sub_v_pravo_v_lavo | |
| triax_hodnota_vibracii_a_sub_h_sub_zadna_rukovat | |
| triax_hodnota_vibracii_na_kov_a_sub_h_sub | |
| triax_hodnota_vibracii_na_ocel_a_sub_h_sub | |
| triax_hodnota_vibracii_s_priklepom_do_betonu_a_sub_h_sub | |
| triax_vibracie_pilenia_a_sub_h_sub | |
| triax_vibracie_pilenia_drevo_a_sub_h_sub | |
| triax_vibracie_pilenia_drevo_kov_a_sub_h_sub | |
| triax_vibracie_sekania_a_sub_h_sub | |
| triax_vibracna_pila_na_ocel_ah | |
| triax_vibracne_pravidelne_bocne_uchopenie_a_sub_h_sub | |
| triax_vibracne_sekanie_a_sub_h_sub | |
| triax_vibracne_vrtanie_a_sub_h_sub | |
| triax_vibracny_sekaci_zdvih_a_sub_h_sub | |
| triax_vibracny_vrtaci_zdvih_a_sub_h_sub | |
| triaxska_vibracia_bocna_rukovat_a_sub_h_sub | |
| triaxska_vibracia_bocna_rukovat_avt_a_sub_h_sub | |
| triaxska_vibracia_obycajna_bocna_rukovat_a_sub_h_sub | |
| trieda_elektrickej_ochrany | |
| trieda_tesnenia | |
| trojosova_vibracna_avt_bocna_rukovat_a_sub_h_sub | |
| turbo | |
| tvar_goliera | |
| tvar_rukovate | |
| typ_baterie | |
| typ_drziaka_nastroja | |
| typ_klincov | |
| typ_lasera | |
| typ_motora | |
| typ_prepinaca | |
| typ_retaze | |
| typ_sponky | |
| typ_uderov | |
| typ_vypinaca | |
| typ_vysavaca | |
| uchytenie_kotuca | |
| uhlovo_nastavitelna_hlava_noznice | |
| uhol | |
| uhol_kmitu | |
| uhol_zasobnika | |
| ulozenie_kolies | |
| upinaci_rozsah_sklucovadla | |
| upinacia_kliestina | |
| upinanie | |
| upinanie_bit | |
| upinanie_kliestiny | |
| upinanie_kotuca | |
| upinanie_nastroja | |
| upinanie_velkost_vrtaka | |
| uroven_hluku | |
| uroven_vibracii | |
| uroven_vibracii_rezanie_betonu_hrubka_5_mm | |
| usb_port | |
| usb_vystup | |
| utahovaci_moment_stupen_1_2_3_4 | |
| utahovaci_moment_tvrdy_makky_spoj | |
| utahovaci_moment_tvrdy_stredny_makky_spoj | |
| vakuum | |
| velkost_drziaka | |
| velkost_kliestiny | |
| velkost_otvoru | |
| velkost_skrutky | |
| velkost_vnutornej_priruby | |
| velkost_vretena | |
| vertikalny_luc | |
| verzia_bluetooth | |
| vhodne_pre_triedu_prachu | |
| vibracia_triax_vpredu_a_sub_h_sub | |
| vibracia_triax_vzadu_a_sub_h_sub | |
| vibracie | |
| vibracie_brusenia_triaxu_a_sub_h_sub | |
| vibracie_brusenie | |
| vibracie_drevo_sub_h_sub | |
| vibracie_pil_k_drevo | |
| vibracie_si_sub_h_sub_pilovy_drevotriesky | |
| vibracne_pohyby | |
| vibracny_k_faktor_rezanie_betonu_hrubka_5_mm | |
| vibracny_vykyv | |
| vlastnosti | |
| vnutorne_rozmery | |
| vnutorny_polomer_strihu | |
| volnobezne_otacky_1_stupen | |
| volnobezne_otacky_2_stupen | |
| volnobezne_otacky_3_stupen | |
| volnobezne_otacky_bocna_kefa_standart_tichy | |
| volnobezne_otacky_boost_rezim | |
| volnobezne_otacky_dolestovaci_mod | |
| volnobezne_otacky_hlavne_kefy_standart_tichy | |
| volnobezne_otacky_lestiaci_mod | |
| volnobezne_otacky_rezim_adt | |
| volnobezne_otacky_rezim_boost | |
| volnobezne_otacky_stupen_1_2 | |
| volnobezne_otacky_stupen_1_2_3 | |
| volnobezne_otacky_stupen_1_2_3_4 | |
| volnobezne_otacky_tempomatu_1_2_3 | |
| vonkajsi_polomer_strihu | |
| vonkajsi_priemer_kotuca | |
| vonkajsie_rozmery_bez_akumulatorov | |
| vrecko_na_bateriu | |
| vrtanie | |
| vrtanie_diamantoveho_kotuca | |
| vrtanie_kotuca | |
| vrtanie_noz_kov | |
| vrtanie_piloveho_kotuca | |
| vrtanie_rezneho_kotuca | |
| vydaj_vzduchu | |
| vydrz_akumulatorov_na_jedno_nabitie | |
| vyhrievane_miesta | |
| vykon | |
| vykyv_pohybov | |
| vykyvy_za_minutu | |
| vymena_piloveho_listu_bez_nastrojov | |
| vypustacie_hrdlo | |
| vyska_bocneho_frezovania | |
| vyska_kosenia | |
| vyska_pasu | |
| vyska_zdvihu | |
| vyskovy_reproduktor | |
| vystup_ac | |
| vytlak_max | |
| zapinaci_tlak | |
| zavit_pre_stativ | |
| zavit_vretena | |
| zdroj_lasera | |
| zdroj_svetla | |
| zdroj_svetla_bodove | |
| rozmery_d_x_s_x_v | 1.670 x 700 x 810 mm |
| volnobezne_otacky | 3.400 min-1 |
| otvor_piloveho_kotuca | 30 mm |
| hmotnost | 54 kg |
| max_rezny_vykon_pri_45 | 58 mm |
| max_rezny_vykon_pri_90 | 85 mm |
| priemer_kotuca | 315 mm |
| Max. rezný výkon pri 90° | 85 mm |
| Max. rezný výkon pri 45° | 58 mm |
STOLOVÁ PÍLA Makita 2712
12,19 € s DPH
STOLOVÁ PÍLA Makita 2712 od značky Makita — Stolové píly. Skladom v Stavebninách Nová Baňa, doručenie do 1 hodiny v Novej Bani a okolí alebo osobný odber od 6:00.
Odhadované dodanie:3 dní
2712 STOLOVÁ PÍLA Makita
| Rozmery | 1,670 × 700 × 810 mm |
|---|---|
| Dru00e1u017eka | |
| farba | |
| Materiu00e1l | |
| objem | |
| akumulator | |
| al_hlinik | |
| automaticke_cistenie_filtra | |
| b_bodove_svetlo_b | |
| b_hlavne_svetlo_b | |
| basovy_reproduktor | |
| bl_motor | |
| bluetooth | |
| bluetooth_trieda | |
| bocny_naklon_dolava_do | |
| bocny_naklon_doprava_az_do | |
| brzda_motora | |
| cas_na_naplnenie_zasobnika | |
| cas_prevadzky_s_2_x_bl1860b_2_x_bl4050f_stupen_1_2_3 | |
| cas_vyhrievania_na_jedno_nabitie_baterie_bl1860b | |
| cas_zahrievania_na_jedno_nabitie_baterie_bl1041b | |
| casy_nabijania_4_ks_lxt_akumulatorov_br_bl1830b_bl1850b_bl1860b | |
| casy_nabijania_4_ks_xgt_akumulatorov_br_bl4020_bl4025_bl4040_bl405_bl4080 | |
| casy_nabijania_8_ks_lxt_akumulatorov_br_bl1830b_bl1850b_bl1860b | |
| casy_nabijania_8_ks_xgt_akumulatorov_br_bl4020_bl4025_bl4040_bl405_bl4080 | |
| celkova_dlzka | |
| celkova_nabijatelna_kapacita | |
| celkova_vyska | |
| chod_dolava_a_doprava | |
| cista_hmotnost | |
| deadman_prepinac | |
| delenie_pilovej_retaze | |
| delenie_retaze | |
| desat_stupnov_ohrevu | |
| diamantovy_kotuc | |
| dlzka_bitu | |
| dlzka_hadice | |
| dlzka_kabla | |
| dlzka_klinca | |
| dlzka_klincov | |
| dlzka_kmitu | |
| dlzka_listy | |
| dlzka_napajacieho_kabla | |
| dlzka_pasu | |
| dlzka_piloveho_listu | |
| dlzka_piniek | |
| dlzka_prepojovacieho_kabla | |
| dlzka_rezu | |
| dlzka_skrutky | |
| dlzka_sponky | |
| dlzka_striekacej_hadice | |
| dlzka_vibratora_hriadela | |
| dlzka_vodiacej_listy | |
| dlzka_zdvihu | |
| doba_dosiahnutia_bodu_varu | |
| doba_fukania_rychlost_1_2_3_4_s_bl4025 | |
| doba_pouzitia_s_bl1041b_stupen_1_2_3 | |
| doba_pouzitia_s_bl1860b_stupen_1_2_3 | |
| doba_prevadzky_na_jedno_nabitie_akumulatora_bl1016 | |
| doba_prevadzky_na_jedno_nabitie_akumulatora_bl1830b | |
| doba_prevadzky_na_jedno_nabitie_akumulatora_bl1850b | |
| doba_prevadzky_na_jedno_nabitie_s_bl1830b_1_2_stupen | |
| doba_prevadzky_na_jedno_nabitie_s_bl1860_bez_automatickeho_otacania_1_2_3_stupen | |
| doba_prevadzky_na_jedno_nabitie_s_bl1860_s_automatickym_otacanim_1_2_3_stupen | |
| doba_prevadzky_na_jedno_nabitie_s_bl1860b_bez_automatickeho_otacania_1_2_3_stupen | |
| doba_prevadzky_na_jedno_nabitie_s_bl1860b_s_automatickym_otacanim_1_2_3_stupen | |
| doba_prevadzky_na_jedno_nabitie_s_bl4040_bez_automatickeho_otacania_1_2_3_stupen | |
| doba_prevadzky_na_jedno_nabitie_s_bl4040_s_automatickym_otacanim_1_2_3_stupen | |
| doba_prevadzky_s_2_x_bl4020_350_w_500_w | |
| doba_prevadzky_s_2_x_bl4025_350_w_500_w | |
| doba_prevadzky_s_2_x_bl4040_350_w_500_w | |
| doba_prevadzky_s_2_x_bl4050_350_w_500_w | |
| doba_prevadzky_s_2_x_bl4080_350_w_500_w | |
| doba_prevadzky_s_bl4050f | |
| doba_prevadzky_s_pdc1200_350_w_500_w | |
| doba_svietenia | |
| doba_svietenia_bodove_sveto | |
| doba_svietenia_s_bl1850b_stupen_1_2_3 | |
| doba_svietenia_stupen_1_2 | |
| doba_svietenia_stupen_1_2_3 | |
| doba_svietenia_stupen_1_2_3_strboskop | |
| doba_svietenia_vysoka_stredna_nizka | |
| doba_varenia_1_salka_kavy_160_ml | |
| dosah | |
| dostupne_velkosti | |
| drazka | |
| drazkovanie | |
| drevotrieskova_doska_na_rezanie_vibracii_k | |
| drziak_naradia | |
| dva_stupne_ohrevu | |
| efektivna_dlzka_rezu | |
| efektivna_dlzka_strihu | |
| emisie_vibracii_a_h | |
| emisie_vibracii_ah_d | |
| energeticka_kapacita | |
| energeticka_kapacita_pdc1200 | |
| energia_narazu_epta | |
| excentricita | |
| excentricke_pohyby | |
| excentricke_pohyby_za_minutu | |
| excentricke_vykyvy | |
| excentricke_vykyvy_dolestovaci_mod | |
| excentricke_vykyvy_lestiaci_mod | |
| faktor_akustickej_neistoty_k | |
| faktor_hluku_k | |
| faktor_neistoty_vibracii_k | |
| faktor_neistoty_vibracii_s_priklepom_do_betonu_k | |
| faktor_sumu_k | |
| faktor_vibracii_k | |
| farba_luca | |
| farba_svietenia | |
| frekvencia_dab | |
| frekvencne_pasma | |
| fukacia_sila | |
| hak_a_slucka_pre_velkost_papiera | |
| hladina_akustickeho_tlaku_l_sub_pa_sub | |
| hladina_akustickeho_vykonu_l_sub_wa_sub | |
| hladina_hluku | |
| hladina_vody_min | |
| hladina_zvuku | |
| hlbka | |
| hlbka_hoblovania | |
| hlbka_hoblovania_0_150_mm | |
| hlbka_hoblovania_150_240_mm | |
| hlbka_hoblovania_240_312_mm | |
| hlbka_ponoru | |
| hlbka_ponoru_max | |
| hlbka_zarezania | |
| hlinikovy | |
| hlinikovy_podvozok | |
| hlucnost | |
| hluk_odchylka_k | |
| hmotnost_bez_kabla_epta | |
| hmotnost_bez_zacieho_nastroja | |
| hmotnost_epta | |
| hmotnost_stroja_vratane_baterie_epta | |
| hmotnst_s_popruhmi_bez_akumulatorov | |
| hodnota_vibracii_a_sub_h_sub | |
| hrubka_cepele | |
| hrubka_izolacnej_steny | |
| hrubka_klincov | |
| hrubka_kotuca | |
| hrubka_kotuca_a60 | |
| hrubka_kotuca_gc120 | |
| hrubka_kotuca_wa60 | |
| hrubka_pasu | |
| hrubka_rezu | |
| hrubka_sponky | |
| hrubka_tiesky_240_304_mm | |
| hrubka_triesky | |
| hrubka_triesky_150_240_mm | |
| hrubka_triesky_do_150_mm | |
| id_600_v_cv_500_mm2_jednojadrovy | |
| id_600_v_iv_500_mm2_jednojadrovy | |
| id_600v_vvr_150mm2_trojjadrovy | |
| id_6600v_cv_500_mm2_jednojadrovy | |
| idealna_pre_travnatu_plochu | |
| indikator_vystupu | |
| intenzita_svetla | |
| intenzita_svetla_0_5_1_m | |
| intenzita_svetla_bodove_svetlo | |
| intenzita_svetla_hlavny_zdroj_svetla | |
| intenzita_svetla_stupen_1_2 | |
| intenzita_svetla_stupen_1_2_3 | |
| intenzita_svetla_vysoka_stredna_nizka | |
| k_faktor_hluku | |
| kapacita_baterie | |
| kapacita_mokre_vysavanie | |
| kapacita_nadrze_na_retazovy_olej | |
| kapacita_olejovej_nadrze | |
| kapacita_papierove_vrecko | |
| kapacita_papieroveho_vrecka | |
| kapacita_rezania_pri_400_n_mm2 | |
| kapacita_rezania_pri_800_n_mm2 | |
| kapacita_suche_vysavanie | |
| kapacita_textilne_vrecko | |
| kapacita_varenia_na_jednu_12_v_max_4_0_ah | |
| kapacita_varenia_na_jednu_14_4v_bateriu_3_0_ah | |
| kapacita_varenia_na_jednu_18v_bateriu_3_0_ah | |
| kapacita_varenia_na_jednu_18v_bateriu_6_0_ah | |
| kapacita_vrecko_na_prach | |
| kapacita_zasobnika | |
| kapacita_zberneho_sacka | |
| kapacita_zbernej_nadoby | |
| kapacita_zbernej_nadoby_prach_voda | |
| kapacita_zbernej_nadoby_suche_mokre | |
| kapacita_zbernej_sackov_techtil_papier | |
| kapacita_zberu_pre_vodu | |
| kliestiny_rozsah | |
| klince_s_polkruhovou_hlavou | |
| kompatibilna_dlzka_skrutky | |
| laserova_dioda | |
| laserova_emisna_trieda | |
| led_ziarovka | |
| magneticka_pridrzna_sila | |
| material | |
| max_cistiaca_plocha | |
| max_doba_fukania_s_2_x_bl1840b | |
| max_doba_fukania_s_2_x_bl1850b | |
| max_doba_fukania_s_2_x_bl1860b_stupen_1_2 | |
| max_doba_fukania_s_bl1850b_stupen_1_2_3 | |
| max_doba_fukania_s_bl1860b | |
| max_doba_fukania_s_pdc1200_normal_boost | |
| max_doba_fukania_sania_s_bl4025 | |
| max_doba_prevadzky_s_bl4025_stupen_1_2_3 | |
| max_dojazd_4_x_bl1860 | |
| max_dosah_postreku_horizontal | |
| max_dosah_pripojenia | |
| max_energeticka_kapacita | |
| max_hlasitost_bluetooth | |
| max_hlbka_drazky | |
| max_hlbka_frezovania | |
| max_hlbka_materialu | |
| max_hlbka_rezu | |
| max_hlbka_rezu_pri_45 | |
| max_hlbka_rezu_pri_60 | |
| max_hlbka_rezu_pri_90 | |
| max_hlbka_rezu_pri_pri_48 | |
| max_hrubka_brusneho_kotuca | |
| max_hrubka_kablov | |
| max_hrubka_kotuca | |
| max_hrubka_oceloveho_plechu | |
| max_hrubka_rezneho_kotuca | |
| max_hrubka_rezu | |
| max_hrubka_rezu_ocel | |
| max_hrubka_silonu | |
| max_hrubka_strihu | |
| max_hrubka_strihu_ocel_nerez | |
| max_kapacita | |
| max_kapacita_krimpovania_cu_med | |
| max_obsah_zberneho_vrecka_textilne_lanove | |
| max_odchylka_horizontalne | |
| max_odchylka_vertikalne | |
| max_otacky | |
| max_otvorenie_cepele | |
| max_otvoreninie_noznice | |
| max_pracovny_cas | |
| max_pracovny_tlak | |
| max_prevadzkovy_tlak | |
| max_priemer_brusky | |
| max_priemer_brusneho_kotuca | |
| max_priemer_brusnych_kamenov | |
| max_priemer_drevo_0 | |
| max_priemer_konarov | |
| max_priemer_miesadla | |
| max_priemer_ocelovej_rurky | |
| max_priemer_rezneho_kotuca | |
| max_priemer_rurka_0 | |
| max_priemer_viazania | |
| max_priemer_vrtania | |
| max_priemer_vrtania_drevo_1_2_stupen_samorezny_vrtak | |
| max_priemer_vrtania_drevo_1_2_stupen_vrtacia_korunka | |
| max_priemer_vrtania_drevo_1_2_stupen_vrtak | |
| max_priemer_vrtania_ocel | |
| max_prietok | |
| max_prietok_tekutin | |
| max_prietok_vody | |
| max_prietok_vody_bez_trysky | |
| max_prietok_vzduchu | |
| max_prietok_vzduchu_1_2_3_stupen | |
| max_prietok_vzduchu_1_2_3_stupen_s_bl1860b | |
| max_prietok_vzduchu_fukania | |
| max_prietok_vzduchu_normal_boost | |
| max_prietok_vzduchu_rezim_boost | |
| max_prietok_vzduchu_sania | |
| max_prietok_vzduchu_sanie_fukanie | |
| max_prietok_vzduchu_stupen_1_2_3_4 | |
| max_prietok_vzduchu_tempomatu_1_2_3 | |
| max_prud_vzduchu | |
| max_rezna_kapacita | |
| max_rezna_kapacita_pri_45 | |
| max_rezna_kapacita_pri_90 | |
| max_rezna_kapacita_s_krytom_bez_krytu | |
| max_rezny_vykon | |
| max_rezny_vykon_drevo | |
| max_rezny_vykon_makka_ocel_hlinik | |
| max_rezny_vykon_ocel | |
| max_rezny_vykon_ocel_jakel_s_x_v_x_hrubka | |
| max_rezny_vykon_ocel_rura_hrubka | |
| max_rezny_vykon_pri_0 | |
| max_rezny_vykon_pri_48 | |
| max_rezny_vykon_pri_50 | |
| max_rezny_vykon_pri_53 | |
| max_rezny_vykon_pri_56 | |
| max_rezny_vykon_pri_60 | |
| max_rezny_vykon_pri_600_n_mm2 | |
| max_rezny_vykon_priemer_rury | |
| max_rezny_vykon_rura | |
| max_rezny_vykon_rurka_profil | |
| max_rezny_vykon_sadrokarton | |
| max_rychlost_retaze | |
| max_rychlost_retaze_eco_medium_high | |
| max_rychlost_vzduchu | |
| max_rychlost_vzduchu_1_2_3_stupen | |
| max_rychlost_vzduchu_1_2_3_stupen_s_bl1860b | |
| max_rychlost_vzduchu_1_2_stupen_s_bl1860b | |
| max_rychlost_vzduchu_bost_mode | |
| max_rychlost_vzduchu_fukanie | |
| max_rychlost_vzduchu_kratka_dlha_hubica | |
| max_rychlost_vzduchu_normal_boost | |
| max_rychlost_vzduchu_rezim_boost | |
| max_rychlost_vzduchu_tempomatu_1_2_3 | |
| max_sila_fukania | |
| max_sila_fukania_normal_boost | |
| max_sila_fukania_rezim_boost | |
| max_sila_fukania_tempomatu_1_2_3 | |
| max_sila_krimpovania | |
| max_sila_sania | |
| max_sila_tahu | |
| max_sila_tlaku | |
| max_staticky_tlak | |
| max_teplota | |
| max_teplota_privadzanej_vody | |
| max_uhol_stupania | |
| max_vakuum | |
| max_velkost_kliestiny | |
| max_vrtaci_vykon_beton | |
| max_vrtaci_vykon_beton_korunka_preraz_vrtak | |
| max_vrtaci_vykon_beton_kov_drevo | |
| max_vrtaci_vykon_diamantova_korunka | |
| max_vrtaci_vykon_drevo | |
| max_vrtaci_vykon_drevo_vrtak_vykruzovacia_korunka | |
| max_vrtaci_vykon_korunka | |
| max_vrtaci_vykon_ocel | |
| max_vrtaci_vykon_ocel_beton_drevo | |
| max_vrtaci_vykon_ocel_drevo | |
| max_vrtaci_vykon_ocel_drevo_beton | |
| max_vrtaci_vykon_ocel_drevo_murivo | |
| max_vrtaci_vykon_ocel_drevo_vr_korunka | |
| max_vrtaci_vykon_ocel_drevo_vr_korunka_kamen | |
| max_vrtaci_vykon_ocel_drevo_vr_korunka_murivo | |
| max_vrtaci_vykon_ocel_hlinik | |
| max_vrtaci_vykon_ocel_kamen | |
| max_vrtaci_vykon_ocel_kamen_drevo_priemer | |
| max_vrtaci_vykon_ocel_kamen_drevo_vyk_korunka | |
| max_vrtaci_vykon_vrtak | |
| max_vykon_12_v_max | |
| max_vykon_14_4_v | |
| max_vykon_14_4_v_18_v_40_vmax_ac | |
| max_vykon_18_v | |
| max_vykon_18v_6ah | |
| max_vykon_7_2_v | |
| max_vykon_ac | |
| max_vykon_fukanie_sanie | |
| max_vykon_s_bl1860b | |
| max_vykon_stupen_1_2_3_4 | |
| max_vyska_rezu | |
| max_vyska_snehu | |
| max_vystup | |
| max_vystup_14_4v | |
| max_vystup_18v | |
| max_vystup_napatia_pdc1200_pdc01 | |
| max_vzdialenost_vyhadzovania_snehu | |
| max_zahlbenie | |
| max_zanorenie | |
| maximalna_hlbka_skenovania | |
| maximalna_hrubka_oceloveho_plechu_400_n_mm_sup_2_sup | |
| maximalna_hrubka_plechu_inox_600_n_mm_sup_2_sup | |
| maximalna_hrubka_vetvy | |
| maximalna_odchylka | |
| maximalna_sacia_vyska | |
| maximalna_sirka_rezu_45 | |
| maximalna_sirka_rezu_90 | |
| maximalna_vyska_pohara | |
| maximalny_dosah | |
| maximalny_krutiaci_moment | |
| maximalny_krutiaci_moment_tvrdy_makky_spoj | |
| maximalny_podtlak | |
| maximalny_povolovaci_moment | |
| maximalny_priemer_otvoru | |
| maximalny_prietok | |
| maximalny_prietok_pripojenie_na_vodovod_stupen_1_2 | |
| maximalny_prietok_samonasavanie_stupen_1_2 | |
| maximalny_prikon | |
| maximalny_pripojitelny_vykon | |
| maximalny_saci_vykon | |
| maximalny_saci_vykon_stupen_1_2 | |
| maximalny_saci_vykon_stupen_1_2_3 | |
| maximalny_tlak | |
| maximalny_tlak_vzduchu_vodny_stlpec | |
| maximalny_utahovaci_moment | |
| maximalny_utahovaci_moment_1_stupen | |
| maximalny_utahovaci_moment_2_stupen | |
| maximalny_utahovaci_moment_tvrdy_makky_spoj | |
| maximalny_vykon | |
| maximalny_vykon_1_2_3_stupen | |
| maximalny_vystupny_prud | |
| maximalny_vystupny_vykon | |
| maximalny_vystupny_vykon_s_bl4040f | |
| medeny_viazany | |
| menovite_napatie | |
| menovite_napatie_baterie | |
| menovity_vykon | |
| mikrovlnny_vykon_vysoky_nizky | |
| min_hladina_sania | |
| min_polomer_rezania | |
| minimalny_priemer_hadice | |
| mnozstvo_uvarenej_vody | |
| motorova_brzda | |
| mulcovaci_noz | |
| mulcovacia_funkcia | |
| nadrz_retazovy_olej | |
| napajacie_napatie | |
| napatie | |
| nastavenia_urovne_ohrievania | |
| nastavenia_urovne_vykurovania | |
| nastavenie_jasu | |
| nastavenie_pracovnej_vysky | |
| nastavenie_predkmitu | |
| nastavenie_rezu | |
| nastavenie_sklonu_rezu_do_prava_lava | |
| nastavenie_uhla_svietenia | |
| nastavenie_vysky_kosenia | |
| neistota_k_sub_lpa_sub | |
| nepretrzita_doba_svietenia | |
| nepretrzita_doba_svietenia_s_bl1041b_stupen_1_2_3 | |
| nepretrzita_doba_svietenia_s_bl1860b_stupen_1_2_3 | |
| nepretrzita_doba_svietenia_s_bl4040_stupen_1_2_3 | |
| nepretrzita_doba_svietenia_stupen_1_2 | |
| nepretrzita_prevadzka_radio | |
| nepretrzita_prevadzka_radio_lampa_stupen_1 | |
| nepretrzita_prevadzka_s_2_x_bl4050f_stupen_1_2_3 | |
| nepretrzita_prevadzka_s_bl1860b | |
| nepretrzita_prevadzka_s_bl4025_stupen_1_2_3_4 | |
| nepretrzita_prevadzka_s_bl4040_bl1860b_bl1050b | |
| nepretrzita_prevadzka_s_bl4040_stupen_4 | |
| nepretrzita_prevadzka_s_bl4050f_stupen_1_2_3_4 | |
| nepretrzita_prevadzka_s_pdc1500 | |
| neprtrzita_prevadzka_s_bl4050f_18_5_60 | |
| nivelacny_rozsah | |
| nizky_tlak | |
| nosnost | |
| objem_nadoby | |
| objem_nadrze | |
| objem_nasavania | |
| objem_vane_pevny_mat_tekutiny | |
| objem_zasobnika | |
| objem_zberneho_kosa | |
| objem_zbernej_nadoby | |
| objem_zmesi | |
| oblast_merania_interier | |
| obsah | |
| obsah_nadrzky_na_vodu | |
| obsah_vodnej_nadrze | |
| obsah_zasobnika_na_stlaceny_vzduch | |
| obvod_krytu_motora | |
| obvod_rukovati | |
| ocelovy_podvozok | |
| ochrana_pred_restartom | |
| ochrana_proti_nahodnemu_zapnutiu | |
| ochrana_proti_pretazenia | |
| odchylka_k | |
| oddelovaci_vykon_45 | |
| oddelovaci_vykon_90 | |
| odporucana_plocha_kosenia | |
| odporucany_kompresor | |
| optimalna_vzdialenost_prenosu | |
| optimalny_dosah_pripojenia | |
| otacky | |
| otacky_bez_zatazenia | |
| otacky_naprazdno | |
| otacky_naprazdno_1_stupen | |
| otacky_naprazdno_2_stupen | |
| otacky_naprazdno_3_stupen | |
| otacky_naprazdno_4_stupen | |
| otacky_naprazdno_pri_3_rychlostnom_stupni | |
| otacky_naprazdno_stupen_1_2 | |
| otacky_pri_volnobehu | |
| otacky_pri_zatazi | |
| otacky_volnobezne | |
| otocny_dolava_az_o | |
| otocny_doprava_az_o | |
| otvor_pre_objimku | |
| pat_stupnov_chladenia | |
| piemer_klincov | |
| pocet_bodov_laseroveho_luca | |
| pocet_brusnych_pohybov | |
| pocet_kmitov_dolestovaci_mod | |
| pocet_kmitov_lestiaci_mod | |
| pocet_kmitov_za_minutu | |
| pocet_kmitov_za_minutu_stupen_1_2 | |
| pocet_laserovych_liniek | |
| pocet_lucov | |
| pocet_merani_na_sadu_baterii | |
| pocet_nabijacich_portov | |
| pocet_otacok_piest | |
| pocet_rezacich_pohybov | |
| pocet_strihov_na_prazdno | |
| pocet_strihov_za_minutu | |
| pocet_strihov_za_minutu_stupen_1_2_3 | |
| pocet_uder_za_minutu_1_stupen | |
| pocet_uder_za_minutu_2_stupen | |
| pocet_uder_za_minutu_stupen_1_2 | |
| pocet_uder_za_minutu_stupen_1_2_3 | |
| pocet_uder_za_minutu_stupen_1_2_3_4 | |
| pocet_uderov_naprazdno | |
| pocet_uderov_naprazdno_1_stupen | |
| pocet_uderov_naprazdno_2_stupen | |
| pocet_uderov_naprazdno_3_stupen | |
| pocet_uderov_naprazdno_4_stupen | |
| pocet_uderov_naprazdno_stupen_1_2_3_4 | |
| pocet_uderov_za_minutu | |
| pocet_vreciek | |
| podporovane_baterie | |
| pohon_kolies | |
| pracovna_hlbka | |
| pracovna_sirka | |
| pracovna_teplota | |
| pracovna_zataz | |
| pracovny_cas_pri_jednom_nabiti_2_baterii_bl1860b | |
| pracovny_cas_pri_jednom_nabiti_baterie_v_rezime_vysokeho_jasu | |
| pracovny_cyklus | |
| pracovny_dosah_s_detektorom | |
| pracovny_tlak | |
| pracovny_tlak_pripojenie_na_vodovod_stupen_1_2 | |
| pracovny_tlak_samonasavanie_stupen_1_2 | |
| pracovny_tlak_stupen_1_2_3 | |
| prenikanie_prachu | |
| presnost | |
| presnost_merania | |
| presnost_samonivelacie | |
| presnost_vodovahy | |
| prevadzkova_doba_18v_6_0_ah | |
| prevadzkovy_dosah_rotujuci_luc | |
| priemer_brusneho_kotuca | |
| priemer_brusneho_papiera | |
| priemer_brusnej_dosky | |
| priemer_drotu | |
| priemer_drviaceho_noza | |
| priemer_klincov | |
| priemer_lestiaceho_kotuca | |
| priemer_lestiacej_podusky | |
| priemer_lestiacich_kotucov | |
| priemer_miesadla | |
| priemer_nitov | |
| priemer_nylonovej_kefy | |
| priemer_objimky | |
| priemer_okruhu | |
| priemer_otvoru | |
| priemer_otvoru_kotuca | |
| priemer_padu | |
| priemer_piloveho_kotuca | |
| priemer_piniek | |
| priemer_prednych_kolies | |
| priemer_rezneho_kotuca | |
| priemer_rezu | |
| priemer_skrutky | |
| priemer_skrutky_sadrokartonu | |
| priemer_strihu | |
| priemer_vibratora | |
| priemer_vrtule | |
| priemer_zadnych_kolies | |
| priemer_zakladnej_dosky | |
| priestorovy_hodnota_vibracii_a_sub_h_sub | |
| priestorovy_vibracie_vrtanie_a_sub_h_sub | |
| prietok_stupen_1_2 | |
| prietok_vody | |
| prietok_vody_stupen_1_2_3 | |
| prietok_vzduchu | |
| prietok_vzduchu_stupen_1_2_3 | |
| prietok_vzduchu_stupen_1_2_3_4 | |
| prietok_vzduchu_turbo_mod | |
| prikon | |
| rezim_cinnosti_priklepove_vrtanie_do_betonu | |
| rezim_cinnosti_vrtanie_do_kovu | |
| rezim_skenovania | |
| rezna_kapacita | |
| rezny_kotuc | |
| rozmer_brusneh_pasu_s_x_d | |
| rozmer_brusneho_papiera | |
| rozmer_brusneho_pasu | |
| rozmer_brusnej_dosky | |
| rozmer_d_x_s_x_v_pracovny | |
| rozmer_d_x_s_x_v_prepravny_skladovaci | |
| rozmer_pasov | |
| rozmer_piloveho_pasu | |
| rozmer_s_popruhmi | |
| rozmer_spodnej_platne | |
| rozmer_stola | |
| rozmer_zakladnej_dosky | |
| rozmery_bez_akumulatora_d_x_s_x_v | |
| rozmery_celkova_dlzka | |
| rozmery_d_x_s | |
| rozmery_samotny_stroj_d_x_s_x_v | |
| rozmery_x_v | |
| rozostup_nozov | |
| rozpatie_luca_horizontalne | |
| rozpatie_luca_zvisle | |
| rozsah_automatickej_kalibracie | |
| rozsah_naklonu_zakl_dosky | |
| rozsah_nastavenia_riadenia_krutiaceho_momentu | |
| rozsah_pasma_am | |
| rozsah_pasma_dab | |
| rozsah_pasma_dab_dab | |
| rozsah_pasma_fm | |
| rozsah_pre_samonivelizaciu | |
| rozsah_skosenia | |
| rozsah_upinania_kliestiny | |
| rychlost | |
| rychlost_brusneho_pasu | |
| rychlost_jazdy | |
| rychlost_otacania | |
| rychlost_otacania_kefy_1_stupen | |
| rychlost_otacania_kefy_2_stupen | |
| rychlost_otacania_kefy_3_stupen | |
| rychlost_pasu | |
| rychlost_piloveho_pasu | |
| rychlost_posuvu | |
| rychlost_retaze | |
| rychlost_retaze_bez_zatazenia | |
| rychlost_strihu | |
| rychlost_viazania | |
| rychlost_vpred_1_2 | |
| rychlost_vpred_1_2_3 | |
| rychlost_vzad | |
| saci_otvor | |
| saci_vykon | |
| saci_vykon_1_stupen | |
| saci_vykon_2_stupen | |
| saci_vykon_3_stupen | |
| saci_vykon_stupen_1_2 | |
| saci_vykon_stupen_1_2_3 | |
| sada_obsahuje | |
| samorezna_skrutka | |
| sasi | |
| sedem_stupnov_chladenia | |
| sedem_stupnov_ohrevu | |
| sila_jednotliveho_priklepu | |
| sila_jednotliveho_priklepu_epta | |
| sirka | |
| sirka_celusti | |
| sirka_drazky | |
| sirka_hoblovania | |
| sirka_luca | |
| sirka_noznice_na_travu | |
| sirka_pasu | |
| sirka_rezneho_nastroja | |
| sirka_rezu | |
| sirka_sponky | |
| sirka_zaberu | |
| sirka_zaberu_hlavne_kefy_s_bocnou_kefou | |
| sirka_zaberu_noz_kov_noz_plast_zacia_hlava | |
| sirka_zaberu_noz_plast_zacia_hlava | |
| sirka_zaberu_zacia_hlava_plast_noz | |
| sklon_stola | |
| sklopny_dolava_az_o | |
| sklopny_doprava_az_o | |
| skrutka_do_sadrokartonu | |
| skrutky_s_hrubym_zavitom | |
| skrutky_s_vysokou_pevnostou | |
| skrutky_s_vysokou_pevnostou_10_9 | |
| skrutky_s_vysokou_pevnostou_f10t | |
| smer_polomeru | |
| spodny_otvor | |
| sposob_stabilizacie | |
| sposob_vysavania | |
| standardne_skrutky | |
| standardny_rezaci_nastroj | |
| standardny_zaci_nastroj | |
| strizmy_radius | |
| strizny_vykon_pri_200_n_mm | |
| strojova_skrutka | |
| strojove_skrutky | |
| stupen_ochrany | |
| svetelny_tok | |
| svetelny_tok_bodove_svetlo | |
| svetelny_tok_hlavny_zdroj_svetla | |
| svetelny_tok_stupen_1_2 | |
| svetelny_tok_stupen_1_2_3 | |
| svetelny_tok_vysoky_stredny_nizky | |
| svetelny_vykon | |
| system_ochrany_baterie | |
| technologia_kosenia | |
| teplota | |
| tireda_vysavania | |
| tolerancia_detekcie_polohy | |
| tolerancia_snimania_hlbky | |
| triax_hodnota_vibracii_a_sub_h_sub | |
| triax_hodnota_vibracii_a_sub_h_sub_predna_rukovat | |
| triax_hodnota_vibracii_a_sub_h_sub_v_pravo_v_lavo | |
| triax_hodnota_vibracii_a_sub_h_sub_zadna_rukovat | |
| triax_hodnota_vibracii_na_kov_a_sub_h_sub | |
| triax_hodnota_vibracii_na_ocel_a_sub_h_sub | |
| triax_hodnota_vibracii_s_priklepom_do_betonu_a_sub_h_sub | |
| triax_vibracie_pilenia_a_sub_h_sub | |
| triax_vibracie_pilenia_drevo_a_sub_h_sub | |
| triax_vibracie_pilenia_drevo_kov_a_sub_h_sub | |
| triax_vibracie_sekania_a_sub_h_sub | |
| triax_vibracna_pila_na_ocel_ah | |
| triax_vibracne_pravidelne_bocne_uchopenie_a_sub_h_sub | |
| triax_vibracne_sekanie_a_sub_h_sub | |
| triax_vibracne_vrtanie_a_sub_h_sub | |
| triax_vibracny_sekaci_zdvih_a_sub_h_sub | |
| triax_vibracny_vrtaci_zdvih_a_sub_h_sub | |
| triaxska_vibracia_bocna_rukovat_a_sub_h_sub | |
| triaxska_vibracia_bocna_rukovat_avt_a_sub_h_sub | |
| triaxska_vibracia_obycajna_bocna_rukovat_a_sub_h_sub | |
| trieda_elektrickej_ochrany | |
| trieda_tesnenia | |
| trojosova_vibracna_avt_bocna_rukovat_a_sub_h_sub | |
| turbo | |
| tvar_goliera | |
| tvar_rukovate | |
| typ_baterie | |
| typ_drziaka_nastroja | |
| typ_klincov | |
| typ_lasera | |
| typ_motora | |
| typ_prepinaca | |
| typ_retaze | |
| typ_sponky | |
| typ_uderov | |
| typ_vypinaca | |
| typ_vysavaca | |
| uchytenie_kotuca | |
| uhlovo_nastavitelna_hlava_noznice | |
| uhol | |
| uhol_kmitu | |
| uhol_zasobnika | |
| ulozenie_kolies | |
| upinaci_rozsah_sklucovadla | |
| upinacia_kliestina | |
| upinanie | |
| upinanie_bit | |
| upinanie_kliestiny | |
| upinanie_kotuca | |
| upinanie_nastroja | |
| upinanie_velkost_vrtaka | |
| uroven_hluku | |
| uroven_vibracii | |
| uroven_vibracii_rezanie_betonu_hrubka_5_mm | |
| usb_port | |
| usb_vystup | |
| utahovaci_moment_stupen_1_2_3_4 | |
| utahovaci_moment_tvrdy_makky_spoj | |
| utahovaci_moment_tvrdy_stredny_makky_spoj | |
| vakuum | |
| velkost_drziaka | |
| velkost_kliestiny | |
| velkost_otvoru | |
| velkost_skrutky | |
| velkost_vnutornej_priruby | |
| velkost_vretena | |
| vertikalny_luc | |
| verzia_bluetooth | |
| vhodne_pre_triedu_prachu | |
| vibracia_triax_vpredu_a_sub_h_sub | |
| vibracia_triax_vzadu_a_sub_h_sub | |
| vibracie | |
| vibracie_brusenia_triaxu_a_sub_h_sub | |
| vibracie_brusenie | |
| vibracie_drevo_sub_h_sub | |
| vibracie_pil_k_drevo | |
| vibracie_si_sub_h_sub_pilovy_drevotriesky | |
| vibracne_pohyby | |
| vibracny_k_faktor_rezanie_betonu_hrubka_5_mm | |
| vibracny_vykyv | |
| vlastnosti | |
| vnutorne_rozmery | |
| vnutorny_polomer_strihu | |
| volnobezne_otacky_1_stupen | |
| volnobezne_otacky_2_stupen | |
| volnobezne_otacky_3_stupen | |
| volnobezne_otacky_bocna_kefa_standart_tichy | |
| volnobezne_otacky_boost_rezim | |
| volnobezne_otacky_dolestovaci_mod | |
| volnobezne_otacky_hlavne_kefy_standart_tichy | |
| volnobezne_otacky_lestiaci_mod | |
| volnobezne_otacky_rezim_adt | |
| volnobezne_otacky_rezim_boost | |
| volnobezne_otacky_stupen_1_2 | |
| volnobezne_otacky_stupen_1_2_3 | |
| volnobezne_otacky_stupen_1_2_3_4 | |
| volnobezne_otacky_tempomatu_1_2_3 | |
| vonkajsi_polomer_strihu | |
| vonkajsi_priemer_kotuca | |
| vonkajsie_rozmery_bez_akumulatorov | |
| vrecko_na_bateriu | |
| vrtanie | |
| vrtanie_diamantoveho_kotuca | |
| vrtanie_kotuca | |
| vrtanie_noz_kov | |
| vrtanie_piloveho_kotuca | |
| vrtanie_rezneho_kotuca | |
| vydaj_vzduchu | |
| vydrz_akumulatorov_na_jedno_nabitie | |
| vyhrievane_miesta | |
| vykon | |
| vykyv_pohybov | |
| vykyvy_za_minutu | |
| vymena_piloveho_listu_bez_nastrojov | |
| vypustacie_hrdlo | |
| vyska_bocneho_frezovania | |
| vyska_kosenia | |
| vyska_pasu | |
| vyska_zdvihu | |
| vyskovy_reproduktor | |
| vystup_ac | |
| vytlak_max | |
| zapinaci_tlak | |
| zavit_pre_stativ | |
| zavit_vretena | |
| zdroj_lasera | |
| zdroj_svetla | |
| zdroj_svetla_bodove | |
| rozmery_d_x_s_x_v | 1.670 x 700 x 810 mm |
| volnobezne_otacky | 3.400 min-1 |
| otvor_piloveho_kotuca | 30 mm |
| hmotnost | 54 kg |
| max_rezny_vykon_pri_45 | 58 mm |
| max_rezny_vykon_pri_90 | 85 mm |
| priemer_kotuca | 315 mm |
| Max. rezný výkon pri 90° | 85 mm |
| Max. rezný výkon pri 45° | 58 mm |
Recenzie
Zatiaľ nie sú žiadne recenzie.
Nie je na sklade
- Doručenie zadarmo na všetky objednávky nad 100€
Máte otázky?
Neváhajte nás kontaktovať
Neváhajte nás kontaktovať
Vaša platba je 100% Secure
Recenzie
Zatiaľ nie sú žiadne recenzie.